The Ultimate Guide to Making a Homemade Cannabis Vaporizer

This article may contain links to some of our affiliate partners. These are brands we trust and brands we feel represent the highest quality standards. When clicking links, we may earn commissions to help support our site. Learn more by reading our full disclaimer.

All you need are some household supplies…

Ever wanted to make your own marijuana vaporizer, but didn’t know it could be easily created with just a few everyday household supplies? If you want to start vaping cannabis but are on a budget, or you just want the experience of creating your own, our simple guide will walk you through making your own awesome homemade vape.

While there are plenty of excellent vapes you could purchase on the market, some people find that making their own vaporizer is a much more interactive, fun, and exciting experience, and in some cases, it can also substantially cut down on the cost of getting started.

Whatever your reason is for undertaking the task of making your very own vaporizer, our simple steps can serve as a tool to help guide you through the process.

There are various methods you can use to produce your handmade vaporizing device, but the one we will share with you is probably the most simple in our opinion, especially for those of you who are giving this your first attempt. Before we look at what materials you’ll need and how you go about making your own homemade vaporizer, let’s first look at what vaping is, for the benefit of those who are new to the subject.

What Is Vaping?

what is vaping?

Vaping is simply an alternative method of consuming cannabis. Unlike smoking weed, where you are burning your bud, vaping involves heating cannabis either in dried herb or in an oil form to temperatures below its combustion point. This heating method produces a vapor which you then inhale.

Some of the arguments in favor of vaping as opposed to smoking are that it is a more convenient and discreet way of consuming cannabis. Vape pens, for example, are small and convenient to carry around, they fit easily in a bag, and are a great way of consuming cannabis on the go. Vape pens are simple to use; you simply press a button to activate the atomizer and inhale.

Also, the fact that you are heating rather than burning your weed means you are producing vapor rather than smoke. One of the biggest advantages vaping has over smoking weed is that you get to experience stronger flavors as well as avoiding the harmful effects of inhaling marijuana smoke.

There are, however, some drawbacks with vaping. The initial cost of purchasing your vaping device can be quite high and also the learning curve to familiarize yourself with the equipment, and vaping generally, is quite steep. There are also some concerns about the safety of vaping, too, particularly around the use of toxic substances as thinning agents to transform raw cannabis oil into a more liquid form which is suitable for vaping.

Thankfully, as you will see from this simple step-by-step guide, making your own homemade vaporizer isn’t as daunting a task as you may think. You just need to source the materials, and the rest is pretty straightforward.

How to Make a Homemade Vaporizer Using a Lightbulb

how to make a homemade vaporizer using a lightbulb

First, let’s begin with the supplies you’ll need. You’ll likely find these items around your home. If not, you can inexpensively purchase them from almost any store in your area (such as a grocery store).

  • A clear glass lightbulb
  • A corkscrew or a drill and drill bit
  • A flathead and Phillips screwdriver
  • Pliers
  • Duct tape or electrical tape
  • Two straws or empty pen tubes
  • A plastic bottle cap from a 2L soda bottle (as long as it fits the base of the lightbulb snugly.
  • A lighter or a candle
  • Last but not least, some weed!

So, you have all of your supplies, here’s how to go about making your own homemade vaporizer out of a lightbulb.

Step 1 – Begin by Hollowing Out the Lightbulb

Before you get started, it is a good idea to lay a couple of sheets of newspaper on the worktop or table that you will be working on. Using a piece of newspaper will make tidying up afterward easier as it will catch all the falling pieces while you are hollowing out the lightbulb.

The actual process of hollowing out a lightbulb requires a certain amount of care and precision as you obviously don’t want to break the lightbulb glass.

Start by using pliers to remove the bottom ring from the base of the lightbulb. Work your way around the edge of the ring, gripping it with the pliers and pulling and twisting until the ring comes off.

When you have the ring fully removed, use a small flathead screwdriver to remove the base glass insulator (black piece of plastic) at the bottom of the bulb. You can do this by sticking the flathead screwdriver through the opening and moving it back and forth until the insulator is fully broken off. Use the pliers to remove any remaining pieces.

Next, remove the clear inner tube from the lightbulb, again using the pliers. Use a large Phillips screwdriver to detach the remaining inner parts of the lightbulb – the glass mount/support, the tungsten filament, etc. – by moving the screwdriver back in forth inside the lightbulb. Use the pliers to remove the remaining inner parts.

Tap the sides of the lightbulb to cause any remaining debris to fall out of the bottom onto the newspaper. You now have a hollow light bulb and are ready to move on to the next step.

Step 2 – Make Two Holes in the Bottle Cap (Make Sure to Choose a Bottle Cap That Fits Snugly to the Base of the Light Bulb)

Some people would simply use a corkscrew to burrow two holes in the bottle cap while others prefer to use a drill. If you choose to use a drill, select a drill bit that will create two holes that are large enough for the straws or empty pen tubes to fit through.

Step 3 – Insert Straws or Pen Tubes into Bottle Cap

After you have drilled the two holes in the bottle cap, insert the two straws or pen tubes. One of these straws/pen tubes will be used for inhaling the vapor. The other will act as a carb, which will clear out the vaporizer as you inhale. It is recommended that you use duct tape or electrical tape to secure the straws/pen tubes to the bottlecap.

Step 4 – Grind up Some Weed and Place It in the Lightbulb

Grind up the weed that you intend on vaping. The more finely ground up the weed, the easier it will be to heat up. Once you have ground up the weed place it in the lightbulb and fit the bottle cap with two straws/pen tubes onto the base of the light bulb to seal it.

Voila! Your very own homemade vaporizer. All that’s left to do is try it out.

Heat the head of the lightbulb using a lighter or candle and wait for the vapor to release from the weed.

Once the vapor starts to release into the lightbulb/homemade vaporizer, gently inhale through one of the straws and enjoy.

Final Thoughts on Making a Homemade Marijuana Vaporizer Using a Lightbulb

As you can see from this easy step-by-step guide to making a homemade vaporizer using a lightbulb, it is pretty simple to make. It shouldn’t take you too long to make your vaporizer either, so you will be ready to enjoy your homemade vaporizer in no time at all.

The only thing to bear in mind is that you will need to be careful when hollowing out the lightbulb as you don’t want to break it and cut yourself with the glass. Take your time, be careful, and follow the steps in this article, and you will find making your own homemade vaporizer is a piece of cake.

Join The Discussion

By clicking "Post Comment” you agree with our Terms of Use and Privacy Policy

    TOC Protection Status © 2000 - 2023 All Rights Reserved Digital Millennium Copyright Act Services Ltd. |

    WayofLeaf use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. More Information